MODEL: JAQ-150 |
TOTAL
POWER: 150
Watts |
INPUT VOLTAGES:110 V to
220 VAC |
#
OF OUTPUTS: QUAD |
Input
|
Input range |
90 V to 132 VAC or
180 V to 264 VAC |
Input frequency |
47 to 63 Hz |
Inrush current |
< 20 A @ 110 VAC; < 40 A @
220 VAC; |
cold start @ 25 ¡æ |
|
Input current |
3.5 A Max. (RMS) @ 110 VAC |
Leakage current |
< 0.5 mA @ 50/60 Hz
264 VAC input |
Output |
Maximum power |
150 Watts for convection |
Adjustment range |
10% |
Hold-up time |
15 ms at 150 watts load and
230
VAC nominal line |
OL protection |
105% to 145% above peak rating |
|
|
Isolation |
Input to output |
1.5 KV/1 min. |
Input to
FG |
1.5 KV/1 min. |
|
|
ENVIRONMENTAL |
Operating temp. |
0 ¡æ to 50 ¡æ ambient derate each output at 4.0% per degree from
50 ¡æ to 60 ¡æ |
Storage temp. |
- 40 ¡æ to 85 ¡æ |
Operating humidity |
5% to 95% (non-condensing) |
Temp. coefficient |
0.04% per degree C |
MTBF |
> 100,000 hours at full load and 25 ¡æ ambient conditions
(Demonstrated) |
SPECIAL FEATURES |
¡ùUniversal AC input by
sw. |
¡ù High efficiency |
¡ù Low output ripple |
¡ù Built-in EMI filter |
¡ùAdjustment output |
¡ù Short circuit protection |
¡ù Overload protection |
¡ù 1 year warranty |
|
|
ORDERING INFORMATION |
MODEL NUMBER |
OUTPUT1
VOLT/AMP |
OUTPUT2
VOLT/AMP |
OUTPUT3
VOLT/AMP
|
TOLERANCE
main aux
|
OPERATING
EFFICIENCY |
RIPPLE&NOISE
main aux
|
NOTES |
JAQ-150-0512A |
5/2-12 |
12/0.2-5 |
24/0.2-2
-12/0.2-1 |
2% 5% |
73% (Typical) |
50mV
240mV |
¡¡ |
JAQ-150-0512B |
5/2-12 |
12/0.2-5 |
-5/0.2-1
-12/0.1-1 |
2% 5% |
75% (Typical) |
50mV 120mV |
|
JAQ-150-0515A |
5/2-12 |
15/0.2-5 |
-5/0.2-1
-15/0.1-1 |
2% 5% |
75% (Typical) |
50mV 150mV |
¡¡ |
|
|