MODEL: JKS-25 |
TOTAL
POWER: 25
Watts |
INPUT VOLTAGES: 90 V or
264 VDC |
#
OF OUTPUTS: SINGLE |
Input
|
Input range |
90 V to 264 VAC
130 V to 370 VDC |
Input frequency |
47 to 440 Hz |
Input current |
< 30 A @ 115
VAC; < 60 A @ 230 VAC;
cold start @ 25 ¡æ |
Leakage current |
1 A Max. (RMS)
@ 115 VAC |
Output |
Maximum power |
25Watts for
convection |
Hold-up
time |
10 ms at full
load and 230 VAC
nominal line |
OL
protection |
pulsing
mode,auto recovery |
OV protection |
110% to 150%
above nominal output |
Plug
of DC output |
2.1¡Ó¡Á5.5¡Ó¡Á11mm;
center "+" |
Length
of cable |
6 feet (typical) |
|
|
Isolation |
Input
to output |
3.0 KV/1 min. |
Input to FG |
1.5 KV/1 min. |
|
|
ENVIRONMENTAL |
Operating temp. |
0 ¡æ to 30 ¡æ
ambient derate each output at 3.5% per
degree from 30 ¡æ to 40 ¡æ |
Storage
temp. |
- 25 ¡æ to 65
¡æ |
Operating humidity |
20% to 85%
(non-condensing) |
Temp. coefficient |
0.04% per
degree C |
MTBF |
> 80,000
hours at full load and 25 ¡æ ambient
conditions (Demonstrated) |
SPECIAL FEATURES |
¡ù Universal input |
¡ù High efficiency |
¡ù Low output ripple |
¡ù Short circuit
protection |
¡ù Over voltage
protection |
¡ù Overload
protection |
¡ù Full enclosed
plastic case |
¡ù1 year warranty |
|
|
|
ORDERING INFORMATION |
MODEL
NUMBER |
OUTPUT
VOLT/AMP |
VOLTAGE
TOLERANCE
|
OPERATING
EFFICIENCY
|
RIPPLE&NOISE
PEAK-PEAK
|
JKS-25-5 |
5/4 |
5% |
70% (Typical) |
50mV |
JKS-25-9 |
9/2.78 |
5% |
70% (Typical) |
90mV |
JKS-25-12 |
12/2.1 |
3% |
72% (Typical) |
120mV |
JKS-25-15 |
15/2.67 |
3% |
72% (Typical) |
150mV |
JKS-25-24 |
24/1.05 |
3% |
74% (Typical) |
240mV |
JKS-25-48 |
48/0.52 |
2% |
74% (Typical) |
300mV |
|
|